Hydraulic Power Pack For Handicap Lift and Elevator
- AC and DC Power Supply
- Redesign available based on the on-site space
- Adoption of premium-quality components
- Ultra-compact size, high-efficiency power, durable, and long service life
Hydraflu-Leading Manufacturer of Power Packs for Platform Lifts in China
The vertical platform lift is designed to lift a passenger in a wheelchair or electric mobility scooter, allowing you to easily arrive at the desired height in your home or the resident’s.
You can also find wheelchair lifts installed on cars, vans, and other vehicles; they provide good convenience to people with mobility impairments to get on and off.
So Hydraflu can make different types of hydraulic power packs tailored to your wheelchair lifts according the requirements.
The power packs intended for home or public place installations are equipped with AC motors, available in voltages of 110V, 220V, as well as three-phase power options including 230V, 380V and 420V, making them suitable for power supply standards in different regions worldwide.
In contrast, the power packs mounted on vans or mobile vehicles adopt DC motors, with a voltage of 12V and 24V.
Hydralfu can issue the tailored solution and technical drawings within 48 hours, and the samples can be produced and dispatched to you in 5-7 days.
Quiet Motor And Gear Pump
Especially for indoor platform lifts, the main requirement is low-noise operation, such as in residential and commercial buildings. So, the hydraulic power units of Hydraflu operate quietly, as they are equipped with high-quality components.
Corrosion-Resistant Hydraulic Valves and Control Blocks
Control Blocks and Hydraulic Valves Hydraflu uses are highly corrosion-resistant. Anodization on the blocks, and all hydraulic valves use zinc-nickel alloy plating. This provides 5 times better corrosion resistance than standard galvanizing, avoiding frequent repairs due to valve rust.
Equipped With A 360° Rotatable Manual Pump
Due to limitations in installation conditions and restrictions on the handle’s opening holes, Hydraflu can redesign the power unit according to the actual situation. We have customized handicap lift power packs for over tens of domestic and international customers.
Emergency Lowering Valve -Backup Solutions For Power Failure
Do you have headache if your platform lift faces a power failure? Hydraflu’s power pack can keep it running normally. The hand pump creates pressure for lifting, and the emergency manual knob on the hydraulic valve lets you lower the platform safely.
AC Power Pack For Lifts In Buildings
In such buildings as residences, schools, business centres, churches, and all public buildings, we need to install a wheelchair lift for mobility for people. Then you must require a Ac Power Pack for your lifts. It consists a silent operating Ac motor, a high-speed hydraulic pump, a steel oil tank attached with some control valves.
If you require a wheelchair lift with a vertical travel range of 5’ to 14’ (1.52 m to 4.27 m), Hydraflu’s power packs are the ideal choice. They boast a load capacity of up to 750 lbs and even more. If you need more travel height and more capacity for your lift, Please discover Hydraflu’s dedicated power units for hydraulic elevators.
Check above listed several customer cases for your reference
single phase and three phase, horizontal and vertical mounting methods of the power packs for your wheelchair lift.
DC Power Pack For Lifts In Vehicles
As on the vehicles, it is the portable battery power supplies that give the main power to the wheelchair lifts. Therefore, Hydraflu offers delicate DC12V single-acting power packs and Dc 24V single-acting power packs for the wheelchair lifts, which are fully matched to the operational requirements of the wheelchair lift.
Since the mounting positions and orientations of wheelchair lift control boxes differ with various vehicle models, the layouts of the hydraulic manual pump and hydraulic solenoid valve need to be adjusted in accordance with the customer’s actual operational requirements.
Features of Hydraflu Power Pack for Platform Lift
Hdyraflu can create customized design solutions for different configurations of your wheelchair lifts to meet your requirements for installation space, mounting location, operational convenience, and other aspects. This will expand the application scenarios of your lifts and help boost your sales volume.
Our hydraulic power packs all come equipped with SAE/PT/NPT hydraulic port connections, and can seamlessly replace those of 95% of wheelchair lifts on the market.
Every power pack from Hydraflu takes a 100% pressure and load-cycle test before leaving our factory to ensure user safety. We served domestic customers
Screw-in manual override valves come standard, ensuring the lift can always be lowered during electrical failures. The hand pump option can generate power manually if the motor doesn’t work.
The stability of Hydraflu’s products has stood the test of practical use – having been widely adopted by numerous domestic customers and exported to more than 20 countries worldwide, they have earned an excellent reputation in the global market.
Our power packs are equipped with a manual override on the solenoid valve, which can lower the lift by hand. This can make sure the wheelchair lift can be safely descended even during an electrical outage.
We offer 12 Volt DC and 24 Volt DC motors, which are the industry standard for vehicle-mounted wheelchair lifts. For wheelchair elevators in the buildings, we also provide motors of AC 110V/220V single phase and AC 230V/400V three phase.
How Does A Handicap Lift Hydraulic Pump Work
A handicap lift can be powered by DC or AC power supply. You switch the button to start the system, the motor rotating, which drives the hydraulic pump to operate. The pump draws hydraulic oil from the oil tank into the hydraulic circuit; the oil then passes through the control valve block and hydraulic valves to actuate the hydraulic cylinder, thereby raising the lift to the preset height. At this point, shut off the motor and the lift will come to an immediate stop.
When you want to lower the lift platform, activate the lower button — the solenoid valve is energized, and the lift descends by virtue of its own gravity and the load‘s. The lowering speed would vary with the change in height, so our wheelchair lift power pack is equipped with a pressure compensating valve that maintains a constant lowering speed, thus ensuring a smooth and comfortable riding experience for passengers.
The Elevator VS Platform Lift
The elevator we often talk about is designed for the car of a number of riders, it certainly has a heavier capacity than a wheelchair lift. It will arrive to a higher floor and the speed of car will be determined by the floors. The movement of the elevator and doors can be controlled automatically. Of course the expenses of installation and maintenance are significantly more than wheelchair lift.
The paltform lifts are designed to transport the rider with a wheelchair or scooter, which are normally weighted 750lb (equal to 340kg) as the maximum capacity.
Our hydraulic power packs can be used on your paltform lifts, which can be installed indoors and outdoors in limited spaces. Strong power, mini size, and low noise motors engineered ensure the durability and reliability of your lifts. Extremly few components of whole hydraulic power packs can greatly reduce the technical issues and maintenance cost.
Absolutely. Each unit has an adjustable relief valve and a adjustable pressure-compensated flow control valve. This allows you to control the hydraulic pressure (typically up to 3200 PSI) and the lowering speed to ensure a gentle landing for the riders.
For optimal performance in various climates, we recommend ISO VG 32 or 46 hydraulic oil. For ultra-cold operating environments, opt for low-viscosity oil to eliminate the possibility of being stuck in the operation system.
Yes, our power units are offered in multiple choices. While DC 12V/24V power pump are perfect for vehicle-mounted lifts (vans and buses), Hydraflu’s AC hydraulic power packs are well-suited for heavy-duty commercial platform lifts and residential elevators, providing reliable, stable power for sustained high-frequency operation.
Hydraflu specializes in compact hydraulic solutions. We offer a variety of reservoir tank sizes (from 0.5L to 10L) in both plastic and steel. If your wheelchair lift has a narrow mounting space, we can offer differdent the tank shapes and motor orientations to fit your specific design of handicap lift.
Quality is non-negotiable. Every Hydraflu hydraulic power pack undergoes a 100% pressure and leak test, as well as a motor performance check before leaving our factory. We ensure that each unit meets the rigorous safety standards required for mobility equipment. Test data to be stored electronically and made available for customers when requested.
Most of our handicap lift hydraulic units are compatible with 2-button or 4-button wire and wireless controllers. We can provide pre-wired units with quick-connect terminals, making the electrical integration of your lift system seamless and “plug-and-play.”
Noise or vibration is often caused by air in the hydraulic system or low fluid levels. Check your hydraulic fluid reservoir first. Our units are designed with low-noise motors and gear pumps, suitable for indoor and home use.