Manual Car Lift Hydraulic Power Unit
This Manual Operated Power Unit is used on for auto hoist. A manually controlled car lift maximizes safety by preventing accidental button presses that could cause unnecessary damage.
- Use a manual valve to control the cylinder
- With single-phase AC motor and pump of low noise
- Adjustable down speed by flow control valve
- The reservoir can be steel or plastic.
- Description
- Components
- Data Sheet
- Other Options
This power pack has no solenoid valve, a manual unloading hydraulic valve to control the retraction of the single-acting cylinder, decent speed controlled by the flow control valve. A high-pressure pump makes flow rate of 6 L/min @ 2600 Psi.
The power units manufactured at the Hydraflu factory can be installed on your car lift and used until the end of its service life. This means that once you purchase a product from Hydraflu, you won’t need to replace it due to its long-lasting durability. Additionally, we offer full lifecycle parts maintenance.
We also provide a wide range of product combinations to meet your needs.
We provide a year warranty, and small orders are also accepted.
| Power | 2.2 KW |
| Voltage | Ac 220 V |
| Rotation Speed | 2850 RPM |
| Pressure | 18 MPa |
| Pump Displacement | 2.1 cc/r |
| Working Duty | S2 |
| Tank Capacity | 10 Liters |
| Mounting | Horizontal |
| Material | Plastic |
Manual hydraulic power pack diagram:
Outline Dimension:
| Type | Motor | Pump Displacment(cc/r) | Tank capacity(L) | Pressure(Mpa) | Mounting | oil port |
| HPU1-04GOEKL(Y)E | AC220V 2.2kw 2850rpm 50Hz | 2.6 | 12 | 16 | Verticle | RC3/8″ (customize) |
| HPU1-03HOEIK(Y)E | AC380V 2.2kw 2850rpm 50Hz | 2.1 | 10 | 18 | ||
| HPU1-03HOEKL(Y)E | AC380V 2.2kw 2850rpm 50Hz | 2.6 | 12 | 16 |
